Fix BSOD Error: Code 0xc00000e it’s a mistake BSOD in Windows 10 that appears when the computer starts up and creates a lot of frustration for users who find it from Microsoft it does not specify in its codes what problem is occurring or the type of solution to apply.
Generally the error 0xc00000e occurs when a hardware component is not detected or a corrupted system file prevents it from starting Windows 10.
In this article, we will show you how to resolve and correct this type of error code without losing the data saved on your device.
How to Fix BSOD Error (0xc00000e) in Windows 10
As mentioned above, the error code 0xc00000e it’s a mistake BSOD (Meaning Blue screen of death) of Windows 10 that appears during startup, which is when an important hardware device was not detected by Windows 10
The problem could arise with a SSD or the HDD, where system files are normally stored. The error can also be caused by a corrupted system file, thus preventing the Windows 10.
In other words, any hardware or file system errors that prevent Windows 10 to locate winload.exe, that is, one of the archives of the Boot manager de Windows and startup, may cause the error 0xc00000e.
Example of a possible scenario
You have a computer running Windows RT, Windows 8, or Windows Server 2012 from which Plug and play disconnect; alternatively, a network problem causes a disk to be removed from the computer Plug and play Disconnected – A fatal error message similar to the following will be displayed:
STOP: 0xC000000E ( parameter1, parameter2, parameter3, parameter4)
The error 0xC000000E indicates a problem with STATUS_NO_SUCH_DEVICE: The parameters of this fatal error message vary depending on the computer configuration.
However, it should be emphasized that not all Stop “0xC000000E” are caused by this type of problem. Also, seeing the Register en Events viewer, no event log indicates that the disk is no longer visible.
After installing this update, if a disk is removed, error 157 to facilitate surprise problem solving. Without this update, you can remove the disk without any notification. For more information, see page Wow, 404 error! Can’t find that page.
This problem occurs because a defense mechanism is started in the system to protect the data on the system. Plug and play.
How to fix error code 0xc00000e?
Since the error does not indicate a specific hardware device or missing system file, you will need to perform one or all of the following troubleshooting steps to resolve the problem, which will be described as appropriate.
1.Using Windows 10 Automatic Repair Tool.
To fix Windows system errors like these, you can use Windows’ native automatic repair tool, following the steps below to use the tool from a bootable installation disc and fix the error:
A. To access the Windows 10 start menu, turn your computer off and on.
SECOND. As soon as the manufacturer’s logo appears on the screen, press the F2 key to enter the boot menu.
C. Once you enter the boot menu, the first thing to do is change the boot options to CD / DVD Rom. If you have a unit USB bootable you can also select to boot from USB.
RE. Enter the CD / DVD operating system Windows 10 and restart the computer which will then boot from CD / DVD Rom. The message will appear on the screen. “Press any key to boot from a CD or DVD”; then press any key on the keyboard.
The repair / installation process of Windows: in this case we only treat repair of the system. Select the time zone, language, and keyboard input method.
On the next screen, click the link Repair your computer located in the lower left corner. Then click Problem solving > Advanced > Auto repair.
To repair files Windows corrupt will take a couple of minutes. The system repair option generally repairs corrupted or missing system files. However, if this method does not solve the problem, go to the next method.
2. Regenerate the boot configuration data file in Windows 10.
The file Boot configuration data O BCD is a system file indicating a Windows how to boot the operating system, then a file BCD corrupt could also cause an error 0xc00000e in the operating system.
To rebuild the BCDyou can start Windows with your installation CD or with a bootable USB drive by following the steps below:
A. Start the computer from DVD de Windows 10 Oh yeah USB Boot.
SECOND. In the page XNUMXd de Windows select the language to install, the time zone, the input method and then the button Forward.
C. Click on Repair your computer located in the lower left> Problem solving > Advanced. Then select Symbol of the system.
RE. Write these commands one by one by pressing the button ENTER after each command:
| bootrec / scanos |
| bootrec / fixmbr |
| bootrect / fixboot |
| bootrec / rebuildbcd |
The command bootrec O bootrec.exe is a tool provided by Microsoft used to troubleshoot and correct startup problems in the recovery environment Windows.
The command bootrec / fixmbrr can be used to correct damage to theMBR (Master Boot Record) and write a MBR Compatible with Windows 10 on the system partition.
The command bootrec / fixboot write a new boot sector to the system partition.
The command bootrec / scanosS scans all disk partitions for an installation of Windows.
The command bootrec / rebuildbcd scan all installation discs that are compatible with your operating system. It also allows you to select the facilities you want to add BCD (Boot configuration data).
ME. Restart your computer and check if the problem is resolved. Otherwise, you will need to try the next method.
3. Reset the BIOS / UEFI settings.
The error 0xc00000e It could also occur due to incorrect configuration of the BIOS and it is possible to solve it by restoring its configuration in the following way:
A. Restart your computer and wait for the manufacturer’s logo to appear, then to access BIOS setup, press one of these keys F2, F12, Esc, Cancun depending on the brand of computer used.
SECOND. Use the arrow keys on your keyboard to navigate through the options on the BIOS up to the default option of your configuration. Click on this option and press the button ENTER on the keyboard to restore the settings of the BIOS.
Save and exit BIOS pressing F10 or using the arrow keys to manually exit. Once you have left the BIOS, the device reboots automatically.
4. Replace the CMOS battery.
If the date and time of BIOS are configured incorrectly, it can be painful to replace the battery CMOS, a chip on the motherboard that stores the configuration of the BIOS, date, time and other information, such as some hardware configurations.
Battery CMOS feeds the firmware BIOS on the device, which must always remain operational even when the device is not connected to a power source. When a device is disconnected from the power source, the BIOS depends on battery CMOS by proxy.
After replacing the battery CMOS, you need to reconfigure the BIOS and restart your computer.
If none of the above methods solve the problem, the last available option is to reinstall Windows 10.
Before reinstalling Windows on your computer, you need to run the apoyo of all important information so you don’t accidentally lose it.