How To Overcome The Error CORRUPTED EXPOOL DRIVER On Windows 10

CORRUPTED EXPOOL DRIVER: If you suddenly find a DRIVER_CORRUPTED_EXPOOL Blue Screen of Death error message when using your computer , then there might be some problems with the device driver on your Windows 10 computer. This kind of BSOD error can occur at any time when you use a PC.

The main cause is due to several errors in the System Pool where drivers become incompatible with the operating system or when the configuration file is damaged for several reasons.

How To Overcome The Error CORRUPTED EXPOOL DRIVER On Windows 10
Overcome The Error CORRUPTED EXPOOL DRIVER On Windows 10

Overcome The Error CORRUPTED EXPOOL DRIVER On Windows 10

If you are one of the users who is currently uncomfortable with the DRIVER_CORRUPTED_EXPOOL error, don’t worry, because in this post I will share some potential improvements that might help resolve this problem. Here are some options for overcoming the CORRUPTED EXPOOL DRIVER error in Windows 10:

Option 1 – Perform System Restore

Running System Restore might help you overcome the DRIVER_CORRUPTED_EXPOOL Blue Screen of Death error in Windows 10. You can do this option by booting into Safe Mode or in System Restore. If you are already on the Advanced Startup Options, just select System Restore and continue with the next steps. And if you just booted your PC into Safe Mode, see the steps below.

1. Tap the Win + R button to open the Run dialog box.
2. After that, type ” sysdm.cpl ” in the field and tap Enter.
3. Next, open the System Protection tab then click the System Restore button. This will open a new window where you have to choose your preferred System Restore point.

After that, follow the instructions on the screen to complete the process and then restart your computer and check whether the problem has been fixed or not.

Option 2 – Run the Blue Screen Troubleshooter

The Blue Screen troubleshooter is a default tool in Windows 10 that helps users fix BSOD errors such as the DRIVER_CORRUPTED_EXPOOL error. It can be found on the Troubleshooters Settings page. To use it, see these steps:

1. Tap the Win + I button to open the Settings panel.
2. Then go to Update & Security> Troubleshoot.

From there, look for an option called ” Blue Screen ” on your right side and then click the ” Run the troubleshooter ” button to run the Blue Screen Troubleshooter and then follow the options on the next screen. Note that you may have to boot your PC into Safe Mode.

Option 3 – Update the Device driver

The device drivers installed on your computer may not be compatible with your operating system which is the reason why the DRIVER_CORRUPTED_EXPOOL Blue Screen error occurred. To fix this, you must update your device driver.

1. Tap the Win + R button on your keyboard to open the Run dialog box.
2. After that, type ” msc ” in the field and press Enter or click OK to open the Device Manager.
3. After opening Device Manager, update all outdated Device drivers on your computer.
4. Next, right-click on all driver entries that are labeled correctly and then click the Update driver option.
5. Now restart your PC and check whether the BSOD error has been fixed or not.

Option 4 – Uninstall the wrong device driver

1. Tap the Win + R button on your keyboard to open the Run dialog box.
2. After that, type “msc” in the field and press Enter or click OK to open the Device Manager.
3. From there, look for a device driver that has a yellow exclamation point indicating that something is wrong with them.
4. And then right-click on each of them and click Uninstall.
5. After you have finished uninstalling the wrong driver, restart your computer and let your computer reinstall the driver that has just been uninstalled.

Option 5 – Run System File Checker

System File Checker or SFC is a default command utility that helps recover damaged files and lost files. This replaces bad and damaged system files to good system files that might cause BSOD Exception Check Engine errors. To execute the SFC command, follow the steps given below.

1. Tap Win + R to launch Run.
2. Type cmd in the field and tap Enter.
3. After opening the Command Prompt, type sfc / scannow

This command will start scanning the system which will take a few moments before it’s finished. After completion, you can get the following results:

  • Windows Resource Protection not found any integrity violations.
  • Windows Resource Protection found corrupt files and successfully repaired them.
  • Windows Resource Protection found corrupt files but were unable to fix some of them.

Option 6 – Try updating the BIOS

As you know, the BIOS is a sensitive part of the computer. Even though it is a software component, the hardware functions depend heavily on it. So, you must be careful when modifying something in the BIOS.

So if you don’t know much about it, it is best if you miss this option and try another one instead. However, if you are experienced in navigating the BIOS, then follow the steps below.

1. Tap the Win + R button to open the Run dialog box.
2. Next, type ” msinfo32 ” in the field and press Enter to open System Information.
3. From there, you must find the search field at the bottom where you have to look for the BIOS version and then press Enter.
4. After that, you will see the developer and BIOS version installed on your PC.
5. Open your manufacturer’s website and then download the latest BIOS version on your computer.
6. If you use a laptop, make sure you stay connected until you update the BIOS.
7. Now double-click on the file downloaded and install the new BIOS version on your computer.
8. Now restart your computer to apply the changes made.

That is to the 6 options for overcoming the CORRUPTED EXPOOL DRIVER error on Windows 10, hopefully one of the options above can be useful for you.

Leave a Reply

Your email address will not be published. Required fields are marked *