Top Five Benefits of Mass Flow Control

Mass flow controllers are commonly used for the applications that require precise measurement, high accuracy and precise quantity of the fluid required to perform the operations.

Top Five Benefits of Mass Flow Control

For example: in argon illustration, you need to flow the argon at exactly 5 SLPM. When it starts flowing the pressure of the gas is 23°C and the value of temperature is 20 PSIA but when the furnace is turned ON then the temperature rises to 27°C and the flow rate increases.

Now you have to prevent the temperature from rising and control the flow rate. Here a proportional flow control comes handy.

Five Benefits of Mass Flow Control:

Below we have provided top five benefits:

Easy Monitoring:

A mass flow controller has the ability to provide you the precise amount of mass flowing through the systems. You can connect it with a monitor and can easily see the amount of flow passing through the system.

High Accuracy:

The main functionality of a mass controller is to provide the accurate quantity of the fluid and does not let the flow rate to increase from the set value. In industries, it is very essential to maintain accuracy in each and everything to get a high quality product.

A flow control provides you a strong control over the process parameters, enhances system throughput and reduces the wastages of the fluids.

If the range of the values goes up and down continuously, then you will not be able to get the expected outcome from the process.

Cost Savings:

Using a mass flow controller not only lets you monitor the mass of the fluid passing through the system and control over the flow rate but also enhances the life of the system.

When any of the system works with electronic pressure controllers then the accuracy and the controlled amount of fluid, temperature and pressure saves it from bearing the extreme conditions. Resultantly, it requires less maintenance and you have to pay less.

Easy to Integrate:

An electronic flow control can fit in the palm of your hand. Most of them are only an inch thick and can be easily integrated at compact places without any hurdle.

Fewer Leak Points:

Using a liquid mass flow controller you can reduce the risk of potential leaks that can happen at any time due to the rising temperature of the fluid.

Having a monitor that timely informs about the rising temperature and pressure of the system, enables you to conveniently control the flow rate by just sending an electronic signal.

Meanwhile, you can keep your system safe and maintained with the help of a digital pressure controller. It allows you to keep the pressure down as per the need of the system and reduces the risk of the potential loss.

Final Words:

There are several major benefits that are associated with the mass flow controllers. You must search the market and buy the one from a good supplier to fulfill your need.

While choosing the controller keep some important factors in your considerations such as the type of the fluid, system in which you will install it and the working environment.

Leave a Reply

Your email address will not be published. Required fields are marked *