How to Switch to Another Music with AirPods

With Apple AirPods, you can adjust a wide variety of shortcut gestures , such as skipping to the next music, for example. Here is the guide you need to know how to adjust the settings of your AirPods. It’s really easy to set them up with any device your headphones are connected to via Bluetooth.

How to Switch to Another Music with AirPods
How to Switch to Another Music with AirPods

How to Switch to Another Music with AirPods

How to adjust the gesture parameters of your AirPods?

You can access the settings of your AirPods via the device to which they are connected.

1. Open the charging case of your AirPods. This action will allow your AirPods to communicate with the device, which they have already linked to. They will be able to connect.

2. On your device, go to “Settings”> “Bluetooth”.

3. Find your AirPods in the device list, then tap the “i” icon next to your Apple headphones.

4. The “Double tap on the AirPod” indicates how you can control the functions of your AirPods. Press the “Left” or “Right” options to assign them a new double-touch gesture.

  • Siri: You can activate Siri with a quick double tap gesture, so you can use your voice commands to search for new music, adjust the volume or use one of the other Siri functions.
  • Next: You can set up a single double tap to go to the next song.
  • Previous: You can also configure a single double key to go back to the start of the playlist or go back to the previous song.
  • Play, Pause or Stop: Finally, you can also add one of these functions to your AirPods if you wish.

Tip: If you like to use your AirPods at work or somewhere else where you will need to stop and restart music playback frequently, then we recommend that you add the “Pause” function to one of your two. AirPods. If you use them often for a long time, without interruption – for example when you work outside – then you can add a gesture for “Next”.

How to Convert iTunes Music to MP3

Convert iTunes Music to MP3: Even if it’s digital music, the sounds you buy from the iTunes Store or download from Apple Music are not MP3 files. 

How to Convert iTunes Music to MP3
How to Convert iTunes Music to MP3

How to Convert iTunes Music to MP3

When the music is not in MP3 format, you can always find a way to convert it to whatever format you prefer. In fact, it only takes a few steps to convert music to MP3, just using the built-in iTunes tool.

ITunes and Apple Music format: AAC and not MP3

People often use the term “MP3” to refer to digital music files, but it must be said that in reality it is not really that. MP3 actually refers to a type of music file.

Music purchased and downloaded from Apple Music is in AAC format. While AAC and MP3 are both digital audio file types, AAC is a new generation format designed to provide better sound while taking up the same amount of space or even less than the format MP3.

There are many programs that can do this conversion, but you don’t necessarily need them. You already have iTunes on your computer, so using it directly would be much easier. The instructions in this article will show you how to use iTunes to convert iTunes music to MP3 format.

There are many programs that can convert sounds from one format to another and support audio conversion from iTunes to MP3. It’s really great, but we repeat it again, in the majority of cases, it’s really not necessary.

Unless you have specific needs (like FLAC format, if you don’t need them, then there’s no point in looking elsewhere), it’s not worth spending more than you need for a audio conversion software. Stay on iTunes.

How to Convert iTunes Music to MP3

1. The audio converter built into iTunes allows you to control the conversion settings, including the type of file to create and the output sound quality.

To change the settings, go to “iTunes”> “Preferences …”> “General”> “Import settings …”> “Import via”> “MP3 encoder”.

2. Find the music (s) you want to convert to MP3 in iTunes and click on it.

Tip: You can select one file at a time, a group of sounds or albums (for this, click on the first music, hold down the “shift” key, then click on the last music) or even music that is not rows one after the other (for this, hold down the “Command” key on your Mac or the “Ctrl” key on a PC, then click on the desired music) .

3. When all the music you want to convert is selected, click “File” on the iTunes menu.

4. Then click “Convert” (in some versions of iTunes, you will need to look for the “Create a new version” option.

5. Click on “Create MP3 version”. This will start converting your iTunes songs to MP3 files so that you can play them on other MP3 players (they also work on Apple devices).

Note: Two files will be created. The new MP3 file you just created will appear in iTunes right next to the original AAC version.

6. It’s good! You have finally successfully converted iTunes files to MP3. You may now want to delete duplicate files or learn more about these files. Continue reading this article to learn more.

Please note: Converting music may reduce the audio quality. Before converting iTunes files to MP3, it is important to know that doing so may reduce the sound quality of your favorite songs.

This is because AAC and MP3 files are compressed versions of the original audio files (raw audio files can be 10 times larger than MP3 or AAC files). Some files have better quality when they were originally created in AAC or MP3.

So converting an AAC file to another format, like MP3, means even more compression and loss of sound quality. Even though this change in quality may be so small that you don’t see any difference, if you convert a file repeatedly,

What to do with unnecessary music or duplicate files?

After converting your iTunes files to MP3, you may no longer want to keep the music of AAC version, it would take up too much disk space. If so, you can remove duplicate files from iTunes. The iTunes function to find duplicate versions of music can really make your job easier.

Since the iTunes version of your audio files are the originals, it would be best that you make a backup before deleting them. All purchases from iTunes can be re-downloaded via iCloud. Please make sure the music is there before you delete it from your software.

Can you convert songs from Apple Music to MP3?

These instructions apply to songs you purchased from the iTunes Store. But let’s face it, who still buys music these days? We listen to them all live! But what about the sounds that come from Apple Music and that are on your computer? Can they be converted to MP3?

The answer is unfortunately no. Apple Music audio files are in AAC format and are protected by a special DRM. This restriction was imposed to ensure that you have an Apple Music subscription and that you have the authorization to listen to songs.

However, you could still download a ton of music, convert it to MP3, cancel your subscription and still keep it on your computer. Yet Apple (and any other music streaming company) wouldn’t want you to do it. So there is no way to convert Apple Music files to MP3, unless you can break DRM.

How to Connect Your Airpods with Your Mac?

Connect Your Airpods with Your Mac: You have Airpods. You have a MacBook. Now you are ready to use the two devices together. But you don’t really know how to configure them.

The good news is that the connection process for Airpods is fairly intuitive, but you’ll still need to know where to go and which buttons to press. Our guide will help you connect your AirPods in minutes.

How to Connect Your Airpods with Your Mac?
How to Connect Your Airpods with Your Mac?

Connect Your Airpods with Your Mac

Are you trying to pair AirPods with your Mac that have already been connected to your iPhone? It’s possible. In fact, it’s much easier than trying to connect a new pair of AirPods. The key is that your iPhone must be connected to the same iCloud account as your Mac, with the same Apple ID.

For most people, this won’t be a problem, but if your iPhone is used by more than one person or if you need a different account for your Mac work, this option may not be possible.

Step 1: Put your AirPods in your ears, then turn on your Mac.

Step 2: When your Mac is charging and you can access MacOS, look in the menu bar at the top right of the screen, where you can see all the connections, all the settings and all the active applications for your Mac. One of them will be the “Bluetooth” setting, which is signaled by a small Bluetooth signal (usually detected by the Wi-Fi signal). Select it.

Step 3: Find the name of your AirPod in the drop-down list. These are generally “AirPods of [your name]”. If you see it, it means your Mac has already recognized your AirPods. Select them and try to play something. You should hear a loud sound when the AirPods connect, followed by the MacOS sounds of your choice. No other configuration required!

To pair new AirPods

If your AirPods have not yet been connected to any Apple device, the setup process will be a little more complicated, but still doable.

Step 1: Keep your AirPods in their charging case. If they are not there, then put them in it. Turn on your Mac when you’re ready to start.

Step 2: Go to the menu and choose “System Preferences” to start. Then click on the “Bluetooth” section.

Step 3: Check left to make sure your Bluetooth is turned on. It probably is, but confirmation is important.

Step 4: Take the charging case, open the cover for better connectivity and rotate it so you can see the back of the case. A button at the bottom center of the case is used for configuration.

This normally activates the Bluetooth function so that your Airpods can be detected by nearby devices – in this case, your Mac. Press and hold this configuration button until the status LED next to it flashes white.

Step 5: Now go back to the “Bluetooth” section on your Mac. Your AirPods should appear in the list of devices. There will be a blue button next to them saying “Connect”. Select it, you can now test your Airpods and check if they work well.

Has your Airpoads failed to connect?

Some people have problems connecting to their Airpods, and they receive a message “Unable to connect to the device”. This usually indicates a connection problem or a sign that iCloud is a bit confusing.

Here are some solutions to fix this problem:

  • First turn off bluetooth on your device. Wait a minute, then turn on Bluetooth and try again. Sometimes that’s all it takes.
  • Turn off your AirPods and Macs, then restart – first your Mac, then your AirPods. This can often clear up any confusion about connectivity.
  • Already connected to an iPhone or iPad? Go to Settings, then tap Bluetooth.
  • Now try to reconnect to your Mac and then to your iPhone if you need to.

Do you have an iPhone / iPad connected to your account? Go to the “Bluetooth” section of “Settings” on your iOS device and see if your AirPods are connected here. If so, select them and choose “Forget this device”. Now try to connect them to your Mac, then reconnect to your iPhone if necessary if this method succeeds.