Windows 10 Error: How to Fix it by System File Checker

System File Checker: Some Windows 10 function errors are caused by corrupted or even nonexistent system files. When this occurs, the user begins to notice unexpected system failures, such as problems when Windows starts , bugs during use and unusual computer actions.

Windows 10 Error: How to Fix it by System File Checker
Windows 10 Error: How to Fix it by System File Checker

Windows 10 Error: How to Fix it by System File Checker

These errors, in general, happen after failures in system, drive and even application updates. However, fixing these problems is simple and can be done using a few commands in the System File Checker. It is important to remember that to start the process, the computer must have Windows updated. Check below the step by step to find the flaws and fix them.

How to check for System File Checker failures

Step 1. Search for “command prompt” in your computer’s search bar. Then, right-click and run the application as an administrator;

Step 2. Open command prompt, type ” sfc / scannow ” and press enter. After that, all protected files on the system will be scanned to see if there are any problems with the computer. The process takes a few minutes to complete;

Step 3. When the process is finished, the System File Checker will display one of the messages:

  • “Windows Resource Protection did not find any integrity breaches”. In this case, there is no need to do anything, as there are no missing or corrupted system files on the computer;
  • ” Windows Resource Protection found corrupted files and successfully repaired them . Details are included in the CBS.Log% WinDir% \ Logs \ CBS \ CBS.log folder .” In this situation, the user should not take any action, as the error has already been corrected by the System File Checker itself. However, it is recommended that the check be carried out again to check if the problem has really been solved;
  • “Windows Resource Protection cannot perform the requested operation “. To perform the verification, the user must enter the computer’s safe mode;
  • “Windows Resource Protection found corrupted files, but was unable to correct some of them . Details are included in the CBS.Log% WinDir% \ Logs \ CBS \ CBS.log folder .” In this case, the user must manually correct the error, replacing the corrupted file.

How to fix the problem in safe mode

Step 1. Click on computer’s settings and go to “Updates and Security”;

Step 2. Then click on the “Recovery” tab and find the “advanced boot” option. Select “restart now” and you will be redirected to your computer’s safe mode;

Step 3. Select “Troubleshooting”;

Step 4. Then click on “advanced options”;

Step 5. In the next window, click “command prompt” to open it offline. Select the user and provide your computer password to open the command;

Step 6. Open the command prompt, type “diskpart” and hit enter. Then type “list volume” and click enter. It will display all the computer’s breakdowns. Observe the one that occupies the most space, as this is where the system is usually stored;

Step 7. Type “exit” and hit enter to exit the diskpart. Then type “sfc / scannow / offbootdir = D: \ / offwindir = C: \ Windows” and press enter. In “offbootdir”, put the letter of your computer’s office where the system is stored. In the “offwinder”, add the letter of the division where the Windows files are;

Step 8. Close the command prompt and then click continue. Windows will start and correct any errors found in the scan.

How to fix errors manually

Step 1. Open command prompt, type “findstr / c:” [SR] “% windir% \ Logs \ CBS \ CBS.log>”% userprofile% \ Desktop \ sfclogs.txt “(without quotes) and press enter;

Step 2. Search for “sfclogs.txt” on your computer and open the editable file;

Step 3. All verification processes will be displayed. Search for the process that contains the message “cannot repair member file”. It is this file that must be replaced manually. Another file can be found on the Internet, however you need to be careful and download it from trusted sites;

Step 4. After finding the file and downloading it to your computer, open the command prompt as an administrator. Type “takeown / f Path_and_FileName” and hit enter. Enter the letter of the compartment in which the file is located and its name, for example: “takeown / f C: \ windows \ system32 \ jscript.dll”. After that, the problem will be solved.

How To Make A Rocket In Minecraft?

Make A Rocket In Minecraft: Some games may offer you the opportunity to organize their own holiday. However, “Minecraft” not only offers, it forces you to take action, because the local fireworks display is simply mesmerizing. 

How To Make A Rocket In Minecraft?
How To Make A Rocket In Minecraft?

How To Make A Rocket In Minecraft?

After all, you are given the opportunity not only crafted a missile that explodes into the air, you can completely change both the color and shape of the explosion, as well as some of its features.

Therefore, everyone should try to do the pyrotechnics in “Minecraft“. Creating salutes really give your new world a paint. So take a look at how to make a rocket in “Minecraft”.

What is a rocket?

First of all you should know what it looks like in a rocket, and what it represents. Then you will be familiar with how to make a rocket in “Minecraft” how to change its settings and how to operate it. So, the rocket – something that contains special items called an asterisk, which is responsible for the color, shape and other parameters of salutes.

This thing really does not find anything in nature or any of the chests in the game world. So don’t count on anyone else – get ready to create your own fireworks. And this game is a complete science, so you spend a lot of time learning how to make a rocket with “Minecraft”,

Force Missiles

You should start with the basics, especially a basic explosive element. If you want to learn how to make a rocket in “Minecraft”, then you need to get the three materials. First of all you need paper on a single copy, then you need a powder (it may require more), and, of course, not without stars – special items, which will do your rocket in real explosive.

They may be needed very much, as it is their number of the number of explosions that occur after the launch of a missile depends. If the paper is clear – it is located in the central cell of the bench, and its value is not varied, the question may come out of gunpowder and asterisks.

It is therefore necessary to consider each of these components in more detail. And then your customers “Minecraft” launch mode you don’t have to – you basic functions can create real pyrotechnic art creations.

Gunpower on a Rocket

To be a functional rocket, you need gunpowder. It is this material that causes it to soar into the sky. Rocket in “Minecraft” 5. 1. 2 is no different from those of missiles in other versions, for this instruction it will be universal.

So, in the basic recipe, you only need one powder flow – this gives you an explosion of one second long at a low altitude. If you add to your Rocket another unit of material, the explosion will be a second longer and soar even higher.

The maximum amount of powder, which can be charged with a rocket – it is three units. Accordingly, when such a burst value lasts for three seconds and happens to the maximum height, guaranteeing the most vivid impression of the fireworks.

Maud on “Minecraft” 1. 5. 2 missiles allow you to increase opportunities to create fireworks, but as you have seen and seen later, you do not need basic functionality and game supplies you have a tremendous potential in this field.

What are the Stars?

On paper and gunpowder, we understand, today there was only one most mysterious element – it was an asterisk. Rocket in “Minecraft” no mods can create incredible fireworks because of them. Kraft a star due to the combination of gunpowder and any dye.

So the specified base color explosion. If subjected to a second object crafting, mixed with dye stars once again, you get a gradient effect, resulting in an explosion of colors that will change from an asterisk to the color you added later.

Moreover, if you add an asterisk to certain ingredients, such as a pen or a ruler of a thick man, you can achieve incredible results. That way you can not only change the shape of the fireworks, but also add to it some visual effects. Experiment. And every time you get new results. But the most variety available to you when you start to install sprockets on the rocket.

Bombings

As in the case of powder, in the basic recipe on a rocket, there is a star. But there is more variety, because you can change it to any number up to seven, and can also use zero right now. If you don’t set any stars on a rocket, it will fly up in the air when activated, but will not explode.

And depending on the amount of these substances embedded in your fireworks the number of explosions will vary. This means that three stars in a rocket will blast three, and five of them – five explosions.

However, it should be borne in mind that to bench only nine cells, one of which is occupied by papers, leaving eight. And you need to split them between the powder and the asterisk.

If you want to maximize the number of explosions, that’s seven, then you need to use only one gunpowder unit, which will lower the short and explosive. If you launch a rocket as high as possible, then you will not be able to install it more than five stars.

Using Mods

Change to fireworks “Minecraft,” there is very little. This is because the system is already advanced, with a large number of possible options for crafting. But, if you want, you can find fashion and set to have more fun and make a game holiday even brighter.

How to Use Spotify Connect

The Spotify Connect is a streming service tool for listening to music on different devices logged into an account. The function is ideal for users who want to send audio playback to other devices compatible with the service’s app or to smart speakers that offer integration with Spotify accounts – such as Amazon Echo and Google Home.

How to Use Spotify Connect
How to Use Spotify Connect

How to Use Spotify Connect

The system also works on smart watches, smart TVs, sound devices, video games, smart displays and set-boxes, such as Apple TV (fourth and fifth generation) and Mi Box , by Xiaomi.

Spotify Connect automatically recognizes other devices with the app connected to the same wireless network. The devices are listed in the app or PC program interface and do not need extra procedures to be integrated. The function even allows you to use one of the products as a remote control.

When playback takes place on a PC or a sound system, simply open the app on your phone and use the player’s controls to pause, fast forward, or choose new music. Check out how to use Spotify Connect below.

How to use Spotify Connect on your computer

Step 1. Open Spotify on the PC and start playing a song. Then click on the speaker icon in the lower right corner of the screen to view the list of connected devices;

Step 2. Click on one of the devices listed to start playing audio.

How to use Spotify Connect on mobile

Step 1. Play a song in the app and tap on the artist’s description at the bottom of the screen to view the player. Then, press the name of the device where the file is playing, as shown in the image below;

Step 2. Touch one of the listed devices to make it work as a speaker. If the audio is on another device, tap “This Phone” or “This iPhone” to listen on the smartphone.

Use the tip to have full control over Spotify music playback on all of your devices that support the service.