Windows 10 Stuck on Splash Screen | 10 Ways to Fix it?

Windows 10 Stuck on Splash Screen: Windows 10 operating system is undoubtedly one of the best operating systems created by Microsoft. However, like all previous versions, it also has its own glitches and bugs. One of the most common problems users experience is getting stuck at the Windows welcome screen when starting the device.

This is a really annoying situation because you can not start working on the devices until the Windows operating system is properly loaded. You may have started to think about the factors causing this problem.

Windows 10 Stuck on Splash Screen | 10 Ways to Fix it?
Windows 10 Stuck on Splash Screen | 10 Ways to Fix it?

Reason behind Windows 10 stuck on splash screen?

There are several factors that cause this problem – faulty windows updates, hardware problems, viruses, fast startup function, etc. Sometimes it happens suddenly. No matter what factors are behind this problem, there are solutions to fix it.

There is no need to panic because here in this article we will discuss various methods to fix the Windows 10 Stuck on Splash Screen problem.

Fix Windows 10 Stuck on Splash Screen

Method 1: Disconnect the Internet

Sometimes the Windows loading process gets stuck because it tries to connect to the Internet. In these cases, you should try to turn off the modem or router temporarily to solve this problem. If the problem is not resolved, you can turn the router or modem back on and continue with the next method.

Method 2: Disconnect USB Devices

Many users reported that USB devices cause Windows 10 to get stuck on the welcome screen. Therefore, you can try to disconnect all USB devices like mouse, keyboards, printers, etc. Now boot the system and check if the problem is solved or not.

Method 3: Check the hardware

What if there is a problem with the system motherboard, RAM, or other hardware? Yes, a probable factor in this problem could be the hardware problem. So you can try to check if all the hardware is configured and working properly or not.

If you are comfortable opening the device, you can take the system to the service center or call a repairman at your home.

Method 4: Perform Automatic System Repair

Running Automatic Repair on Windows 10 has solved the Windows Welcome Screen Stuck issue for many users. But before you can run Automatic Repair, you have to access the Advanced Recovery Options of your device.

1. From the login screen, press Shift and select Restart. This will take you directly to Advanced Recovery Options.

Note: There are other ways to access Early Recovery Options that we have discussed here.

2. On the Choose an option screen, click Troubleshoot.

3. On the troubleshooting screen, click the Advanced option.

4. On the advanced options screen, click Automatic Repair or Startup Repair.

5. Wait for the Windows autostart repairs to complete.

6. Restart and you will have successfully fixed Windows 10 stuck on welcome screen issue, if not then continue.

Method 5: Disable Credential Manager services in safe mode

Sometimes the corrupted Credential Manager service interferes with Windows 10 loading and causes the problem of Windows getting stuck on the welcome screen.

And disabling the Credential Manager service seems to fix the problem once and for all. But to do this, you have to boot your PC in safe mode.

Once you have started the PC in Safe Mode, follow the steps below to disable the Credential Manager services:

1. Press Windows Key + R and type services.msc. 2.Press Enter or click OK.

2. Locate the Credential Manager service in the Services window and right-click on it and select Properties.

3. Now in the Startup type drop-down select Disabled.

4. Click Apply and then OK to save the changes.

5. Restart your PC and check if the problem is resolved.

Method 6: disable fast startup

Quick Start combines cold or full shutdown and hibernation features. When you turn off your PC with the Quick Start feature enabled, it closes all programs and applications running on your PC and also logs out all users. It acts like a newly started Windows.

But the Windows kernel loads and the system session runs, alerting device drivers to prepare for hibernation, that is, saving all current applications and programs running on the PC before close them.

So now you know that Quick Start is an essential feature of Windows, as it saves data when you turn off your PC and start Windows faster.

But this could also be one of the reasons why windows 10 stuck on splash screen. Many users reported that disabling the Quick Launch feature solved their problem.

Method 7: Run the system checks using the command prompt

You may have Windows 10 stuck on the welcome screen due to corrupted files or folders on your PC. Therefore, running the system check will help you identify the root cause of the problem and fix the problem.

1. Put in the Windows installation media or system repair disk / recovery drive and select your language preferences and click Next.

2. Click Repair your computer at the bottom.

3. Now choose Troubleshooting and then Advanced Options.

4. Select the command prompt (With network connection) from the list of options.

5. Enter the following commands at the command prompt and press Enter after each one:

Note: It is important to note that this can be a time-consuming task, so be patient. Wait for the commands to run.

sfc / scannow chkdsk c: / F / R bootrec / fixmbr bootrec / fixboot bootrec / scanos bootrec / rebuildbcd

6. Once the commands are run, exit the command prompt and restart your PC.

Method 8: System Restore

It is one of the useful features that allows you to restore your PC to the previous working settings.

1. Open Advanced Recovery Options using any of the methods listed here or put in Windows installation media or recovery system or drive repair disc, select your language preferences and click Following.

2. Click Repair your computer at the bottom.

3. Now choose Troubleshooting and then Advanced Options.

4. Finally, click on “System Restore”.

5. Click Next and choose the restore point and follow the onscreen instructions to restore your device.

6. Restart your PC and this step may have the problem of fixing Windows 10 stuck on welcome screen.

Method 9: Uninstall the recently installed updates

To uninstall recently installed programs, you must first enter Safe Mode and then follow the steps below:

1. Open the Control Panel by searching for it with the search bar.

2. Now from the Control Panel window click on Programs.

3. Under Programs and Features, click View installed updates.

4. Here you will see the list of currently installed Windows updates.

5. Uninstall the recently installed Windows updates that might be causing the problem and after uninstalling these updates your problem can be solved.

Method 10: Restart Windows 10

Note: If you cannot access your PC, restart the PC several times until you start the automatic repair. Then navigate to Troubleshooting > Reset this PC > Delete everything.

1. Press Windows key + I to open Settings and then click the Update & Security icon.

2. In the menu on the left select Recovery.

3. In Restart this PC, click the “Start” button.

4. Select the option to Keep my files.

5. For the next step you may be asked to insert the Windows 10 installation media, so make sure you have it ready.

6. Now, select your version of Windows and click only on the disk where Windows is installed > Just remove my files.

5. Click the reset button.

6. Follow the instructions on the screen to complete the reset.

Hopefully, using one of the above methods you will be able to fix Windows 10 Stuck on Splash Screen. If you still have any questions about this tutorial, feel free to ask them in the comment section.

Leave a Reply

Your email address will not be published.