How To Restore AirPods Pro To Factory State

Restore AirPods Pro to Factory State: The AirPods Pro , although not common, can fail at any time. This can happen with any product, and Apple’s Active Noise Canceling Wireless Headphones are no exception.

How to Restore AirPods Pro to Factory State

Some of the problems that may appear are: sudden disconnections, poor sound quality, control failures due to touch of the headphones, etc, etc …

How to Restore AirPods Pro to Factory State

If you see yourself in this situation, you shouldn’t lose your cool. Normally these problems are caused by a software failure andrestoring the AirPods Pro to factory stateusually ends them. In addition, you should know that doing this is very simple and that it will not take more than a few seconds.

The factory reset of the AirPods Pro is a little different from the process of restoring the AirPods, but it really has no loss and you just have to follow the step by step that I leave below.

Unlinking and pairing the AirPods Pro again

Before you go to restore the new in-ear headphones, you may want to try anintermediate solutionthat also usually gives very good results and is not so radical.

I am talking about unlinking the AirPods Pro from the iPhone or any other device that is giving you problems and pairing them again. Sometimes this fixes problems related to Bluetooth connectivity and makes everything work normally again.

To test this, the first thing you need to do isunpair the headphones byfollowing these steps on the iOS device (iPhone, iPad or iPod Touch).

  • Access the Settings app and then the Bluetooth section.
  • Once inside, locate the AirPods Pro in the list of devices and tap on the icon with the letter i.
  • Tap on Skip device and confirm that you really want to “forget it”.

When you have done this, the connection between both devices will be removed and you will haveto pair them again. To do this you just have to pair them like the first time.

The quickest and easiest method is to open the headphone case cover while close to the iOS device. Once detected, you will see a button on the device screen to link them with a single touch on the screen.

You can also choose to access the Bluetooth settings and synchronize manually, although the previous process is faster and more comfortable as I said.

Once this is done, the AirPods Pro is likely to work normally again and you don’t have to do anything else. In case the problems continue or you want to restore them to the factory state to give them to someone else or the like, you should follow the steps in the next section.

Restore AirPods Pro to factory state

As I said, if the above was not enough or if you want to give the AirPods Pro to someone else, you must do thecomplete restoration to the factory state. Doing this will remove all user information stored in the hearing aids and will also lose the link with your iOS devices.

The process is simple, you just have to do the following:

  1. Open the case with the AirPods Pro inside.
  2. Press and hold the button on the case on the back for about 15 seconds until the LED light turns white and I blinked.
  3. Close the case and open it again.
  4. Finally, bring it closer to the device you want to pair it with to complete the process and be able to use them again.

Once this is done, your AirPods Pro will be restored and ready to be used again with the same devices or with different ones.

Chances are that after doing this the headphone issues have disappeared. If not, it is recommended that you contact Apple support to find a solution, since it is most likely not a software failure, but rather something related to hardware.

Leave a Reply

Your email address will not be published. Required fields are marked *